Contents
Industrial plant dismantling in Grangemouth and across the Forth valley
We dismantle plant in Grangemouth for process manufacturers, engineering and fabrication firms on the Falkirk estates, distribution operators and district estates teams. Jobs run from stripping out a factory to taking down a redundant batching plant or a group of storage tanks. Survey and method development come first, then isolation and making safe, cutting and separation in a planned order, lifting down, segregation and load-out.
Our crews cover Grangemouth, Falkirk, Larbert, Stenhousemuir, Denny, Polmont, Bo’ness and Linlithgow, out to Stirling, Alloa and Livingston. Shutdown and night shifts suit this work. Send an outline with photographs for a same-day quote from a desktop survey.
What dismantling covers
Plant comes apart in the reverse of the order it went up, so what comes off keeps its value. Some goes back up elsewhere as working equipment, some sells on as machines with life in them, and the rest is separated at the cut face into material that weighs in. Vessels, tanks, silos, pipework, structural steel, boilers, compressors, conveyors and overhead cranes all come down this way.
What we dismantle in Grangemouth
| Plant | What decides the method | How it comes apart |
|---|---|---|
| Columns, vessels and exchangers | The certificates the operator can issue, and when | Released at flanges where the design allows, otherwise cut at marked seams |
| Storage tanks and silos | What the shell carries once it is opened | Taken down ring by ring, stiffening added ahead of each cut |
| Pipe runs, bridges and service mains | What else hangs off the same supports | Drained, isolated, cut between hangers with each length held |
| Machine tools, presses and fabrication plant | Whether a buyer or another building is waiting | Bolts freed, jacked off the base, walked out on air skates |
| Conveyors, sorters and racking | How much of the floor keeps trading | Belts and drives off first, steel released at its joints |
Our industrial plant dismantling page sets out the stages in full.
Contact us
Get In Touch
Please leave a few details and a member of our dismantling team will be in touch to discuss your requirements in more detail.
Where we work in and around Grangemouth
Enquiries come from across the Forth valley.
Process plant in the Forth valley
Vessels, exchangers, tanks and the pipework between them come out of process sites across the valley, with the areas around them working on through the job. See our chemicals sector page.
Engineering on the Falkirk estates
Overhead cranes, runway steel and presses come out of the engineering and fabrication units around Earls Gate, Middlefield and Carronshore when a line changes. See our industrial sector page.
Distribution off the M9 and M876
Warehouses along the motorways re-equip as their work changes, so conveyors, sorters, packing benches and mezzanine steel come out between shifts while the picking floor runs.
Workshops by the docks
Stores and handling businesses behind the dock gates clear heavy plant at its end of life and take out replaced quayside equipment. See our maritime sector page.
Plant rooms on the public estate
Estates teams across Falkirk district replace boilers, chillers, air handling units and standby sets, the old plant broken down where it stands. See our HVAC sector page.
Access and planning for dismantling in Grangemouth
Before any cutting starts on a Grangemouth job, these get settled:
- How the remaining plant stays up. Plant leans on its neighbours in ways the drawings seldom show, so the sequence leaves what remains stable after each cut, with support added where needed.
- Emptying, cleaning and the paperwork that follows. Cleaning, purging and gas-free certification belong to the site operator or a specialist, and the programme is built around the dates those can be issued.
- What is overhead on the route in. Pipe bridges cross the plant roads here, so headroom to the item and above it is taken from the site’s drawings before a machine or a standing position is chosen.
- Where the machine sets up, and where the wagons load. Carse ground by the Forth is soft in places and threaded with buried services, so outrigger positions are checked against site drawings and spread on mats. Road space for the loading point is booked with Falkirk Council, or with Stirling, Clackmannanshire or West Lothian when the address sits in one of those areas.
- Platforms, anchor points and recovery from height. Access, edge protection, how each member is held as it is cut and how a casualty comes down go into the lift plan.
Dismantling for reuse, or for recovery
Plant with a future elsewhere comes apart joint by joint. Connections are released at flanges and bolts wherever the design allows, each piece is match-marked and logged against the general arrangement, and items are crated for the lorry. Machines sold on as working equipment get the same handling, because a buyer pays for what arrives as described.
Plant at the end of its life earns its keep through separation. Stainless is kept clear of carbon steel, cable and non-ferrous go into their own containers instead of the mixed skip, and sections are cut to weighable sizes. Grangemouth jobs are usually a mixture of the two. Mark up the items you want back at survey and they come off while everything around them still holds them square.
Postcodes and areas we cover
We cover the FK postcodes and the EH districts east along the Forth:
- Grangemouth: the town centre, the docks, Bowhouse, Laurieston and Skinflats
- Falkirk district: Falkirk, Larbert, Stenhousemuir, Carron, Bonnybridge, Denny and Polmont
- East along the Forth: Bo’ness, Blackness, Linlithgow and Winchburgh
- Wider area: Stirling, Alloa, Kincardine, Cumbernauld and Livingston
We dismantle plant right across the UK and into Europe.
Why Grangemouth firms choose Synergy Lifting for dismantling
- The cutting order is settled before the price. What each piece carries once its neighbours are gone decides the sequence, and the figure follows from it.
- One survey for the whole plant list. Everything you want gone is looked at on the same visit, including the items you are undecided about, so one method and one programme cover the job.
- One programme, one set of paperwork. Crane, riggers, cutting crew and the wagons taking sections away are ours, with one person answering for the sequence.
- Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, equipment inspected under LOLER and PUWER, SSIP approved, Constructionline Gold Member, certified to ISO 9001 and ISO 14001, and members of the Construction Plant-hire Association.
More than dismantling
Dismantling in Grangemouth sits alongside other work of ours:
How a dismantling job works
- Tell us what the plant is, what it held and whether any is being kept, with photographs and drawings.
- We survey and develop the method, with the sequence worked out so what remains stands safely at each stage.
- Method statement, risk assessment and lift plan go to your team, and certificates are agreed with the site.
- We cut, lift down and segregate in that order.
- Sections load out, with records and match-marking for anything being re-erected.
Common questions
Our plant stands under a run of pipework. Can it still come out?
Yes. The clearance above decides the method well before the weight does. We measure what is overhead, then work close in with a low boom or cut the item into pieces that pass through the gap.
A line at Earls Gate comes out while the unit works. How is the area kept apart?
We agree an exclusion zone with you, screen it and fix the hours for hot and noisy work. Containers for segregated material stand inside the zone, and sections leave by a shutter your people are clear of.
How is dismantling different from demolition?
Demolition takes a structure down and the value is in the cleared site. Dismantling takes plant apart in the reverse of the order it went up, so what comes off keeps its value as equipment, as parts, or as material worth more separated than mixed. The planning takes longer and the work is slower, and on the right job it pays for itself.
Who cleans and certifies the plant before cutting?
Cleaning, purging and gas-free certification sit with the site operator or a specialist, and the sequence is planned around those certificates. Several are valid for one shift only, so the cutting is arranged to match when they can be issued. We agree all of that at survey and write it into the programme.
Get a quote for industrial plant dismantling in Grangemouth
- Phone: 0131 608 0165
- Email: grangemouth@synergy-lifting.co.uk
Tell us what the plant is, what it held and which items you want back, with photographs or drawings of the area. We will say what a survey must cover.
We also provide industrial plant dismantling in Edinburgh, Glasgow, Dumfries and Aberdeen. See all the industrial plant dismantling locations.