Truck-mounted crane

Liebherr LTF 1060-4.1

The Liebherr LTF 1060-4.1 is a 60 tonne, four axle truck-mounted crane with a 40m main boom, supplied with an operator for crane hire or as part of a contract lift.

Maximum capacity: 60 tonnes
Main boom: 10.2m to 40m
Jib: 9.5m or 16mFolding jib, optional
Counterweight: 10.2 tonnes
Axle lines: 4

Download the Liebherr LTF 1060-4.1 spec sheet

Liebherr LTF 1060-4.1 specification sheet
Load charts, working range diagrams, dimensions and axle loads. PDF, 18 pages, 1.7MB.

Download the spec sheet

Specification

Item	Specification
Manufacturer	Liebherr
Model	LTF 1060-4.1
Type	Truck-mounted crane
Maximum capacity	60 tonnes
Main boom	10.2m to 40m, base section and 4 telescopic sections, TELEMATIK telescoping system
Jib	Optional single folding jib 9.5m, or double folding jib 9.5m to 16m, installed at 0, 20 or 40 degrees
Counterweight	10.2 tonnes
Weight and axle loads	9 tonnes on axles 1 and 2, 12 tonnes on axles 3 and 4, 42 tonnes in total, with 10.2t counterweight or 9.2t counterweight with swingaway jib
Outriggers	4-point hydraulic outriggers, remote control, automatic levelling, electronic inclination display
Axle lines	4, SCANIA CB 8×4 MHZ, Mercedes-Benz ACTROS 4141K 8×4 or MAN TGS 41.400 8x4BB truck chassis, supplied by the buyer
Crane drive	Liebherr 4-cylinder diesel in the superstructure, 129kW (175hp), maximum torque 815Nm
Control and safety	LICCON2 safe load indicator, hoist limit switch, safety valves against pipe and hose rupture, test system for servicing
Ownership	Supplied. Our owned cranes are the electric pick and carry machines

Specifications are taken from the manufacturer published specification sheet for this model and are given as a guide only. Machines vary by build, options and configuration, and figures can change without notice. Nothing on this page forms part of a contract or a lift plan: the crane, its configuration and its load chart are confirmed when we quote and plan your lift.