Contents
Industrial plant dismantling in Wigan and across Greater Manchester
We dismantle industrial plant in Wigan for food and drink producers, engineering and component manufacturers, construction product makers and distribution operators along the M6. We survey, write the method, isolate and make safe, then cut and separate in sequence, lift down, segregate and load out, on one redundant vessel or a whole factory. Where a site can only release plant overnight or in a shutdown, we work those hours.
We cover Wigan, Standish, Pemberton, Ince, Hindley, Ashton-in-Makerfield, Leigh and Skelmersdale. Photographs and drawings let a desktop survey put a quote back that day.
What dismantling covers
Taking plant down in the reverse of the order it went up is what keeps it worth something. Equipment with working life left goes back up elsewhere, marked and recorded before a joint is broken, or sells on as a working machine. The rest is sorted as it comes down and sold by weight.
What we dismantle in Wigan
| Plant | What decides the method | How it comes apart |
|---|---|---|
| Filling, packing and process lines | Where the line ends up | Broken at couplings, labelled and wrapped |
| Silos, tanks and hoppers | The certificate the operator issues and its shift | Propped, opened, then taken down ring by ring |
| Presses and machine tools | The bolts and grout holding it down | Freed from the base, slung and skated out |
| Overhead cranes and runway steel | Whether the runway steel stays for the next tenant | Beams lifted span by span, columns last |
| Conveyors, sortation and decking | The hours the shed can give up | Decking lifted in panels as each run empties |
| Boilers, compressors and refrigeration plant | What a plant room door or roof opening passes | Drained, parted at joints, craned from the yard |
See our industrial plant dismantling page.
Contact us
Get In Touch
Please leave a few details and a member of our dismantling team will be in touch to discuss your requirements in more detail.
Where we work in and around Wigan
The plant we take out of Wigan sites comes from these places.
Food and drink factories
The borough holds a good deal of the region’s food and drink manufacturing. Tanks, silos, filling equipment and refrigeration plant come out when a line is replaced, behind the boundary your hygiene team sets. See our food and beverages page.
Martland Park and South Lancashire Industrial Estate
The borough’s two largest employment areas mix manufacturing with warehousing. Machine tools, presses, compressors, ductwork and overhead cranes leave units here, often when a tenant hands a building back clear. See our industrial sector page.
Distribution off the M6 and M58
Around junction 25 and towards Skelmersdale, a change of occupier leaves conveyors, sortation equipment, decking and racking to come down while the shed trades on. See our construction sector page.
Engineering and component works
Manufacturers in the borough make parts for aircraft and vehicles as well as construction products. Machine tools and presses grouted into the floor come up when a bay is cleared, with the services that fed them. See our aerospace and automotive pages.
Plant rooms and roofs in Wigan and Leigh
Heating and cooling plant in both town centres reaches the end of its life. Chillers, boilers, air handling sets and the pipework round them are broken down where they stand and lifted out from the street. See our HVAC sector page.
Access and planning for dismantling in Wigan
Settled before the first cut on a Wigan job:
- What the plant held. The operator, or a specialist it appoints, cleans, purges and certifies each item, and the cutting order follows the shifts those certificates run for.
- Getting sections away from site. With the M6 west, the M61 east and no motorway through the middle, loads leave on the A49 or the A577, where bridges over the main line and the Leeds and Liverpool Canal cap what travels whole. Piece sizes follow the route out.
- Working on the structure. Very little of this job is done from the floor, so the method statement sets out platforms, edge protection, what carries a member while it is cut, and rescue.
- What holds what up. Steelwork takes on load it never had once a neighbour goes, so every stage is worked through and props go in where the frame wants them.
- Crane standing and ground bearing. Former colliery workings and made ground run under the borough, so bearing pressures and mat sizes are agreed before an outrigger goes down. Road closures go through Wigan Council.
Dismantling for reuse, or for recovery
When the plant is going back up, here or at a buyer’s, the method is built around putting it together again. Each item is match-marked and recorded while the structure is whole, bolted and flanged joints are undone instead of being cut, and parts are packed for the wagon and storage. A machine going to a buyer is handled the same way.
Plant that has reached the end of its run pays another way. Stainless is held apart from carbon steel, cable and non-ferrous drop into containers of their own, and steel is cut to lengths a weighbridge can handle. A Wigan job often holds some of each, a line worth rebuilding alongside steelwork worth its weight. Say which pieces matter to you and they leave the structure whole, ahead of any burning.
Postcodes and areas we cover
We cover every WN postcode and the districts around the borough:
- Wigan: town centre, Haigh, Ince, Swinley, Pemberton, Worsley Mesnes and Hindley
- North and west: Standish, Shevington, Orrell, Appley Bridge, Up Holland and Skelmersdale
- South and east: Ashton-in-Makerfield, Bryn, Golborne, Leigh, Atherton and Tyldesley
- Wider area: Bolton, St Helens, Warrington, Chorley, Ormskirk and Ashton-under-Lyne
We dismantle plant right across the UK and into Europe.
Why Wigan firms choose Synergy Lifting for dismantling
- An answer back the same working day. Photographs, drawings and a note of what the plant held are enough to price the work and outline the sequence, ahead of any site visit.
- Hygiene rules followed on food sites. Cutting in a food factory sits behind a barrier your QA team agrees, and the area is cleaned to their standard as each section leaves.
- One contractor from isolation to empty floor. Our own operators, riggers, cutting crews and wagons do the work, so the sequence stays in one pair of hands.
- Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, equipment inspected under LOLER and PUWER, SSIP approved, Constructionline Gold Member, certified to ISO 9001 and ISO 14001, and members of the Construction Plant-hire Association.
More than dismantling
Other work a Wigan dismantling job draws on:
How a dismantling job works
- Tell us what the plant is, what it held, whether any of it is being kept, and send any photographs or drawings.
- We survey and build the cutting sequence, ordered so whatever is left standing carries its load throughout.
- The method statement, risk assessment and lift plan go across with the certificates the site will issue.
- The plant is isolated, then cut, lifted down and segregated in the method’s order, the kept items coming off first.
- Sections load out, with records and marking for anything going back up elsewhere.
Common questions
How do oversized sections leave a Wigan site?
Piece sizes are set at survey against the road the wagons will take. Where a bridge caps height or weight, sections come apart smaller and bolt up again at the far end. Closures go through Wigan Council.
How is hot work handled in a working food factory?
Cutting sits in a screened area your permit covers, with detection, extraction and a fire watch agreed with your engineers. Where a permit is withheld, sections come apart by cold cutting and bolt release inside the boundary your hygiene team sets.
How is dismantling different from demolition?
Demolition takes a structure down and the value is in the cleared site. Dismantling takes plant apart in the reverse of the order it went up, so what comes off keeps its value as equipment, as parts, or as material worth more separated than mixed. The planning takes longer and the work is slower, and on the right job it pays for itself.
Who cleans and certifies the plant before cutting?
Cleaning, purging and gas-free certification sit with the site operator or a specialist, and the sequence is planned around those certificates. Several are valid for one shift only, so the cutting is arranged to match when they can be issued. We agree all of that at survey and write it into the programme.
Get a quote for industrial plant dismantling in Wigan
- Phone: 01942 943 023
- Email: wigan@synergy-lifting.co.uk
Give us the plant, what it held and the items being kept, and attach photographs or drawings of the area.
We also provide industrial plant dismantling in Warrington, Preston, Manchester and Liverpool. See all the industrial plant dismantling locations.