All-terrain crane
Liebherr LTM 1650-8.1
The Liebherr LTM 1650-8.1 is a 700 tonne, eight axle all-terrain crane with a 80m main boom, supplied with an operator for crane hire or as part of a contract lift.
Spec sheet
Download the Liebherr LTM 1650-8.1 spec sheet
Liebherr LTM 1650-8.1
Download the manufacturer’s specification sheet (PDF · 164 pages · 15.3MB).
Key figures
Liebherr LTM 1650-8.1 key figures
- Maximum capacity
- 700 tonnesAt 3m radius, over the rear only
- Main boom
- 17.4m to 80mT3 boom 16.7m to 54m
- Jib
- 21m to 91mOptional luffing jib
- Counterweight
- 155 to 175 tonnes
- Axle lines
- 8
Specification
Liebherr LTM 1650-8.1 specification
| Item | Specification |
|---|---|
| Manufacturer | Liebherr |
| Model | LTM 1650-8.1 |
| Type | All-terrain crane |
| Maximum capacity | 700 tonnes at 3m radius, over the rear only, with the 16.7m (T3) or 17.4m (T5) boom |
| Main boom | Two variants: T3 with 1 base and 3 telescopic sections, 16.7m to 54m; T5 with 1 base and 5 telescopic sections, 17.4m to 80m; TELEMATIK rapid-cycle telescoping |
| Jib | Optional: fixed lattice jib 6m to 62m (F, offset 0, 10, 20 or 40 degrees; NZF hydraulic 0 to 38 degrees), luffing fly jib 21m to 91m (N), 7m folding intermediate section (NK), 1.7m auxiliary jib, Y guying, VE and V2 telescopic boom extensions |
| Counterweight | 155 tonnes; 175 tonnes with the optional additional 20 tonnes; VarioBallast with ballast radius 6.4m, 7.4m or 8.4m |
| Weight and axle loads | On-road from 53 tonnes up to 96 tonnes at 12 tonnes per axle, depending on equipment carried; jobsite driving up to 134 tonnes |
| Outriggers | 4-point, hydraulically telescoping horizontally and vertically, remote control, automatic levelling, electronic inclination display; VarioBase variable support base |
| Axle lines | 8, all steered |
| Tyres and width | 16 tyres, 385/95 R25 standard; 445/95 R25 and 525/80 R25 optional |
| Suspension | Hydropneumatic Niveaumatik on all axles, hydraulic locking |
| Engine | Liebherr 8-cylinder diesel, 505kW (686hp), 3,067Nm; single engine, drives the crane mechanically from the chassis |
| Transmission | ZF automatic with torque converter and intarder, 12 forward and 2 reverse, transfer case with transfer differential |
| Control and safety | LICCON2 safe load indicator, test system, hoist limit switches, pipe and hose rupture safety valves; WindSpeed load charts |
Specifications are taken from the manufacturer published specification sheet for this model and are given as a guide only. Machines vary by build, options and configuration, and figures can change without notice. Nothing on this page forms part of a contract or a lift plan: the crane, its configuration and its load chart are confirmed when we quote and plan your lift.
Compare
Liebherr LTM 1650-8.1 compared with similar cranes
| This craneLiebherr LTM 1650-8.1 | Liebherr LTM 1750-9.1 | Liebherr LTM 1500-8.1 | Tadano AC 8.500-1 | |
|---|---|---|---|---|
| Maximum capacity | 700 tonnes | 800 tonnes | 500 tonnes | 500 tonnes |
| Main boom | 17.4m to 80m | 16.3m to 52m | Up to 84m | 14.7m to 56m |
| Jib | 21m to 91m | Up to 91m | Up to 91m | Up to 90m |
| Counterweight | 155 to 175 tonnes | 204 tonnes | 135 to 165 tonnes | 20 to 180 tonnes |
| Axle lines | 8 | 9 | 8 | 8 |
Related
Find out more
Get a quote
Ready for a quote?
Send us the details and we will come back with a quote, usually the same day for a desktop survey.
Or call 0800 008 6096
