All-terrain crane
Liebherr LTM 1030-2.1
The Liebherr LTM 1030-2.1 is a 35 tonne, two axle all-terrain crane with a 30m main boom, supplied with an operator for crane hire or as part of a contract lift.
Spec sheet
Download the Liebherr LTM 1030-2.1 spec sheet
Liebherr LTM 1030-2.1
Download the manufacturer’s specification sheet (PDF · 22 pages · 3.4MB).
Key figures
Liebherr LTM 1030-2.1 key figures
- Maximum capacity
- 35 tonnesAt 3m radius, over the rear, with 5.5t counterweight
- Main boom
- 9.2m to 30m
- Swingaway jib
- 8.6m to 15mOptional
- Counterweight
- 2.3 to 5.5 tonnes
- Axle lines
- 2
Specification
Liebherr LTM 1030-2.1 specification
| Item | Specification |
|---|---|
| Manufacturer | Liebherr |
| Model | LTM 1030-2.1 |
| Type | All-terrain crane |
| Maximum capacity | 35 tonnes at 3m radius over the rear with 5.5t counterweight |
| Main boom | 9.2m to 30m, 1 base and 3 telescopic sections, hydro-mechanical telescoping, telescopable under partial load |
| Swingaway jib | Optional single folding jib 8.6m or double swing-away jib 8.6m to 15m, mechanical offset at 0, 20 and 40 degrees |
| Counterweight | 2.3 tonnes; 5.5 tonnes in total with the optional additional 3.2 tonnes; hydraulic ballasting ram |
| Weight and axle loads | 12 tonnes per axle, 24 tonnes in total on the road with the 2.3t counterweight carried |
| Outriggers | 4-point, hydraulically telescoping horizontally and vertically, remote control, automatic levelling, electronic inclination display; VarioBase optional |
| Axle lines | 2, both steered, planetary axles with differential locks |
| Tyres and width | 4 tyres, 385/95 R25 standard; 445/95 R25 optional |
| Suspension | Hydropneumatic on all axles, hydraulic locking |
| Engine | Cummins 6-cylinder diesel, 209kW (280hp), 1,152Nm; drives the crane as well (single engine) |
| Transmission | ZF power-shift with torque converter and lock-up, 6 forward and 2 reverse, transfer case |
| Control and safety | Joystick control via Liebherr System Bus, LICCON2 safe load indicator, hoist limit switch, pipe rupture safety valves |
Specifications are taken from the manufacturer published specification sheet for this model and are given as a guide only. Machines vary by build, options and configuration, and figures can change without notice. Nothing on this page forms part of a contract or a lift plan: the crane, its configuration and its load chart are confirmed when we quote and plan your lift.
Compare
Liebherr LTM 1030-2.1 compared with similar cranes
| This craneLiebherr LTM 1030-2.1 | Terex AC 35 L | Liebherr LTM 1040-2.1 | Tadano AC 2.040-1 | |
|---|---|---|---|---|
| Maximum capacity | 35 tonnes | 35 tonnes | 40 tonnes | 40 tonnes |
| Main boom | 9.2m to 30m | 9.4m to 37.4m | 10.5m to 35m | 10.5m to 35.2m |
| Swingaway jib | 8.6m to 15m | 8m side folding | Not stated | 9m |
| Jib | Not stated | Not stated | 9.5m | Not stated |
| Maximum tip height | Not stated | 47m | Not stated | Not stated |
| Counterweight | 2.3 to 5.5 tonnes | 5.5 tonnes | 1.5 to 6.5 tonnes | 6.5 tonnes |
| Axle lines | 2 | 2 | 2 | 2 |
Related
Find out more
Get a quote
Ready for a quote?
Send us the details and we will come back with a quote, usually the same day for a desktop survey.
Or call 0800 008 6096
