City crane
Kato CR-130Rf
The Kato CR-130Rf is a 13 tonne, two axle city crane with a 24m main boom, supplied with an operator for crane hire or as part of a contract lift.
Spec sheet
Download the Kato CR-130Rf spec sheet
Kato CR-130Rf
Download the manufacturer’s specification sheet (PDF · 16 pages · 3.4MB).
Key figures
Kato CR-130Rf key figures
- Maximum capacity
- 13 tonnesAt 1.7m on the 5.3m boom
- Main boom
- 5.3m to 24m6-section
- Jib
- 3.6m to 5.5m2-section
- Maximum hook height
- 30.3mOn the jib; 24.8m on the boom
- Carrier width
- 1.995mOverall width
- Axle lines
- 2
Specification
Kato CR-130Rf specification
| Item | Specification |
|---|---|
| Manufacturer | Kato Works |
| Model | CR-130Rf |
| Type | City crane |
| Maximum capacity | 13 tonnes at 1.7m on the 5.3m boom (8 parts of line); 3.2 tonnes at 5.5m on the 24m boom; 3 tonnes on the optional searcher hook; rooster sheave up to 1.8 tonnes; stationary on rubber and pick and carry (below 2km/h) duties also charted |
| Main boom | 5.3m to 24m, round-shaped 6-section hydraulically telescopic |
| Boom angle | -7.5 to 82 degrees |
| Maximum hook height | 24.8m on the boom, 30.3m on the jib (maximum rated lifting height) |
| Jib | 2-section, 3.6m to 5.5m (2nd section draw-out), hydraulic stepless offset 5 to 60 degrees; 1.6 tonnes on the 3.6m jib, 1 tonne on the 5.5m jib |
| Weight and axle loads | Gross vehicle weight approx. 13,745kg; front axle approx. 6,795kg, rear axle approx. 6,950kg (without optional equipment) |
| Outriggers | Hydraulic H-beam; extension width 4.75m fully extended, 4.3m, 3.7m and 2.7m intermediate, 1.64m retracted |
| Axle lines | 2, planetary drive/steer axles; switchable 4×2 or 4×4; independent front and rear steering; minimum turning radius 6.5m (2 wheel steer), 3.92m (4 wheel steer) |
| Tyres and width | 275/80 R22.5; overall width 1,995mm |
| Suspension | Taper-leaf spring, hydraulic locking with suspension cylinder, front and rear |
| Engine | HINO J05E-UM (EU Stage 4) 4-cylinder turbo diesel with intercooling, 129kW at 2,500rpm, 540Nm at 1,600rpm |
| Transmission | Remote mounted full automatic, 4 forward and 1 reverse, torque converter with lock-up clutch |
| Control and safety | ACS (Automatic Crane System) with voice alarm, slewing automatic stop, working range limit mode, outrigger status detector, overhoist prevention device |
Specifications are taken from the manufacturer published specification sheet for this model and are given as a guide only. Machines vary by build, options and configuration, and figures can change without notice. Nothing on this page forms part of a contract or a lift plan: the crane, its configuration and its load chart are confirmed when we quote and plan your lift.
Compare
Kato CR-130Rf compared with similar cranes
| This craneKato CR-130Rf | Kato CR-200Rf | Kato CR-250Rv | Terex Demag AC 30 City | |
|---|---|---|---|---|
| Maximum capacity | 13 tonnes | 20 tonnes | 25 tonnes | 30 tonnes |
| Main boom | 5.3m to 24m | 6.5m to 28m | 6.7m to 29m | 7.5m to 25m |
| Swingaway jib | Not stated | Not stated | Not stated | 7.1m or 13m |
| Jib | 3.6m to 5.5m | 4m to 5.8m | 5.3m to 8.2m | Not stated |
| Maximum tip height | Not stated | Not stated | Not stated | 40m |
| Maximum hook height | 30.3m | 34.8m | 38.4m | Not stated |
| Counterweight | Not stated | Not stated | Not stated | 2.3 tonnes |
| Carrier width | 1.995m | 2.29m | 2.395m | Not stated |
| Axle lines | 2 | 2 | 2 | 2 |
Related
Find out more
Get a quote
Ready for a quote?
Send us the details and we will come back with a quote, usually the same day for a desktop survey.
Or call 0800 008 6096
