Scroll to top

Crane Hire Lincoln

Crane hire in Lincoln and across Lincolnshire

We provide crane hire in Lincoln, a city with two quite separate lifting problems. Uphill, around the cathedral and the castle, the streets are steep, narrow and listed, and the answer is nearly always a small machine in one carefully chosen position. Downhill and out along the bypass it is estate and distribution work with room to set up. Lincolnshire has no motorway, so everything arrives on the A1 and the A46.

We supply mobile cranes with operators, and we plan and run full contract lifts, across Lincoln, North Hykeham, Doddington, Bracebridge Heath, Newark-on-Trent, Sleaford, Gainsborough, Market Rasen and out towards Grantham and Spalding. Most enquiries get a quote the same working day.

Crane hire or a contract lift?

With CPA crane hire, we supply the crane and operator, and you provide the lift plan, appointed person and lifting insurance. With a contract lift, we handle all of it. Every lift is carried out to BS 7121 by CPCS or NPORS operators, with equipment inspected under LOLER and PUWER. Our guide to crane hire vs contract lifting explains the difference in more detail.

Cranes for Lincoln jobs

Crane type Capacity / reach Typical use
All-terrain mobile crane From 40t to 1,000t Steel frames, heavy plant and agricultural and process equipment
City crane / pick and carry From 5t to 60t Uphill streets, heritage sites and weight-restricted access
Mobile tower crane Up to 60m Tight sites needing height and reach without a fixed tower crane
Tower crane Luffing, flat top and self-erecting Longer construction programmes and restricted sites

Tell us the weight, radius and access for your Lincoln job and we’ll recommend the right machine. Not sure where to start? Read our guide to what size crane you need.

Contact us

Get In Touch

Please leave a few details and a member of our crane hire and contract lifting team will be in touch to discuss your requirements in more detail.

    Where we work in and around Lincoln

    Most of our Lincoln crane hire work falls into a handful of sectors.

    Heritage and conservation

    The cathedral runs a continuous conservation programme covering stonework, glazing, leadwork and structural repair, and the castle and the streets around them are all listed or within the conservation area. Lifting here means stone, scaffold components and plant moved on a steep site with almost no room, and a method that protects the fabric as much as the load.

    Distribution and logistics on the A46 and A1

    The business parks along the bypass and out towards Newark, and the sites with A1 frontage, carry the county’s distribution operations. Lifting there means racking and mezzanine steel, conveyor sections, machinery offloads and building services plant on sites that keep running while we work. See our industrial sector page.

    Agriculture and food processing

    Lincolnshire is one of the most productive agricultural counties in the country, and the processing and packing sites across it bring line installs and removals, silos, tanks, grain and vegetable handling equipment and plant changes fitted into short shutdowns. See our food and beverages page.

    Aerospace and the county’s airfields

    The county has a long-standing RAF presence, with active stations within a few miles of the city and an aerospace supply chain around them. Work on any of those sites is controlled access: clearance and permits arranged ahead of time, and lifts planned to the site’s own standard. See our aerospace sector page.

    Hospitals, schools and colleges

    Chiller and air handling unit replacement, plant room equipment and modular building lifts on sites that stay open or during a holiday shutdown. See our healthcare and pharma and education sector pages.

    Construction, energy and utilities

    Residential and commercial schemes across the city and county bring steel erection and precast, while substation equipment changes, solar and wind work and water treatment plant replacement all come with fixed outage windows. See our construction and power and renewables sector pages.

    Access and planning for lifts in Lincoln

    Every site is different, but a few things come up again and again on Lincoln jobs:

    • No motorway. Everything comes in on the A1 and the A46, with the A15, A17 and A57 feeding the rest of the county. That makes route planning and timing more important here than in most places, and we do both before we quote.
    • Uphill Lincoln. The streets up to the cathedral are steep, narrow and weight restricted, with setts and listed frontages. Gradient affects levelling and what a crane can safely lift at radius, so the standing position gets settled first and it usually decides the machine.
    • Level crossings and low bridges. The rail lines through and around the city put crossings and bridges on several approaches, which limits the route for abnormal loads. We check that as part of the plan.
    • Ground conditions. Fen and low-lying farmland is soft, and rural access is often a field entrance rather than a road. We confirm ground bearing and outrigger positions, and use crane mats where needed.
    • Road closures. Where a lift needs part of a road or pavement closed, we can arrange the traffic management and road closure with Lincolnshire County Council as part of the job.

    Postcodes and areas we cover

    We cover every LN postcode, including:

    • LN1 to LN2: Lincoln city centre, the cathedral quarter, Nettleham, Saxilby and Scampton
    • LN3 to LN6: Cherry Willingham, Bracebridge Heath, Waddington, North Hykeham and Doddington
    • LN7 to LN13: Caistor, Market Rasen, Louth, Horncastle and Alford
    • Wider area: Newark-on-Trent, Sleaford, Grantham, Gainsborough, Spalding, Boston and Scunthorpe

    Beyond Lincolnshire we also work across Nottinghamshire, south Yorkshire and the east Midlands. See all the areas we cover.

    Why Lincoln firms choose Synergy Lifting for crane hire

    • Used to awkward access. Steep streets, heritage settings, field entrances and weight-restricted routes are normal planning for us, not exceptions.
    • Route planning done first. With no motorway in the county, the approach and the timing get settled at quote stage.
    • Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, and a business certified to ISO 9001 and ISO 14001, with Constructionline Gold Member registration.
    • One contractor for the whole lift. We can take on the lift plan, appointed person, RAMS, supervision and insurance.

    How to book a crane

    1. Send us the site location, load weight, access details and dates. Photos help.
    2. We quote, usually the same working day. Complex lifts may need a site visit first.
    3. For contract lifts we prepare the lift plan and RAMS. For CPA hire we advise on crane position and set-up.
    4. We arrive on the agreed day and carry out the lift to BS 7121.

    Common questions

    Can you get a crane up to the cathedral quarter?

    Often, yes, but it depends on the approach, the gradient and whether there is anywhere to stand. Send us the address and photos of the street and the building, and we’ll tell you what is workable before you commit to a date.

    Can you work on a farm or a rural processing site?

    Yes, and a lot of our county work is exactly that. Field and yard access and soft ground are the usual constraints, so we check what the ground will carry, plan the outrigger positions and bring crane mats where the bearing is marginal.

    Do you cover Newark, Sleaford and Grantham?

    Yes, along with Gainsborough, Market Rasen, Horncastle, Boston and Spalding. Send us the site postcode and we’ll quote for it.

    Get a quote for crane hire in Lincoln

    We also provide crane hire in Grimsby, Doncaster, Nottingham and Chesterfield. See all the areas we cover.