Steel Erection Teesside

Packages

Steel + more

Cladding, roofing and demolition too

Coverage

Teesside

TS postcodes

Quotes

Same day

For most enquiries

Overview

Steel erection in Teesside and across the Tees Valley

Cargo and storage sheds go up on the estuary estates for firms handling goods by sea, and offices and public buildings in Middlesbrough and Stockton-on-Tees need decks for new rooftop plant. Around Yarm and Ingleby Barwick the work is more often classroom extensions and canopies. Close to the river and the coast, the wind decides when large panels can be lifted.

Portal frames, canopies and plant decks make up most of the work here, all from your fabricator, and cargo sheds on the estuary estates bring the larger frames. Our Darlington depot is a short run west along the A66, and gangs work across Stockton-on-Tees, Yarm, Guisborough, Redcar, Saltburn and Stokesley. Drawings and site photographs are all we need to price a canopy or a plant deck, often on the day they reach us.

What steel erection covers

Our gangs erect the frame, bolt it, square it up, and add bracing, secondary steel and LFS or SFS framing. Taking existing steel down is part of the service too.

What we do

What we erect in Teesside

Structure	Where it goes up	What sets the method
Cargo and storage sheds	Port-side estates along the estuary	Where the first braced bay sits and the crane’s path down the building
Plant decks and rooftop platforms	Offices and public buildings in Middlesbrough and Stockton	What the existing roof steel can take
Classroom extensions and canopies	Schools and colleges across the four boroughs	Holiday dates and the route past rooms in use
Workshops and small portal frames	Guisborough, Stokesley and the villages towards the moors	One crane position covering the whole frame
LFS and SFS framing	Residential and mixed-use schemes in Stockton and Yarm	Wall order floor by floor, and where bundles land
Frames dismantled for another site	Units being cleared or reconfigured	The order members are released, and match-marks

Our steel erection and dismantling page explains each part of the service.

Get a quote

Tell us about your project

Send us the details and we will come back with a quote, usually the same day for a desktop survey.

Or call 01642 843 216

Sectors

Where we work in and around Teesside

The work here splits across the four boroughs like this.

Canopies and teaching blocks for schools and colleges

Classroom extensions, covered walkways and canopies go up across Middlesbrough, Stockton and Redcar, timed to the school holidays or to weekends. See our education sector page.

Cargo sheds on the port estates

Portal frame sheds and storage buildings for cargo and port users go up on open land beside the estuary. See our maritime sector page.

Plant decks on Middlesbrough and Stockton roofs

Support steel and access platforms for new chillers and air handling units are erected on offices and civic buildings ahead of the plant arriving. See our HVAC page.

Workshops out towards Guisborough and the moors

Small portal frames and workshop buildings go up for engineering and trade firms in Guisborough, Stokesley, Great Ayton and the villages of east Cleveland. See our industrial sector page.

Town schemes in Stockton, Yarm and Ingleby Barwick

Frames, light gauge infill and canopies for residential, retail and mixed-use schemes go up on plots in and around the town centres. See our construction sector page.

Planning

Access and planning for steel erection in Teesside

On Teesside, these get settled before a date is booked:

Wind along the estuary and the coast. Sheds by the river and buildings near the sea at Redcar and Saltburn catch the wind, and a sheeting rail or a large LFS panel becomes unsafe to lift well before a heavy rafter does. Each morning the supervisor compares the forecast with the wind reading on site before the lighter pieces go up.
Stability whenever work stops. The erection sequence leaves each part-built frame able to stand, with temporary bracing or guys added wherever the permanent bracing comes later.
Loads packed to the sequence. Each trailer carries members in the order they go up, so where a site has no lay-down the crane takes steel straight off the bed.
Reclaimed land by the river. Plots beside the Tees sit on reclaimed and former industrial ground, so ground bearing is confirmed at each crane position and mats spread the outrigger loads.
The lift plan ahead of the steel order. Crane positions and what each one can reach are fixed first, and the fabricator plans the loads from that.

Alterations

Alterations, mezzanines and dismantling

A Teesside school that stays open while it gains a link or a platform has its existing frame surveyed before any new steel joins it. A platform inside the school cannot be reached by a crane from outside, so its members come through a double door and are raised while classes carry on elsewhere in the building.

We also dismantle steel for reconfiguration or reuse. The order of release is worked out so the members still in place stay stable, and anything to be re-erected is match-marked so it goes back together the same way at the new site.

Coverage

Postcodes and areas we cover

We cover every TS postcode, including:

TS1 to TS8: Middlesbrough, including Linthorpe, Acklam, Marton and Coulby Newham, plus Ormesby and Eston
TS9 to TS14: Stokesley, Great Ayton, Redcar, Marske, Saltburn, Loftus and Guisborough
TS15 to TS21: Yarm, Ingleby Barwick, Stockton-on-Tees, Norton and Sedgefield
TS22 to TS29: Wolviston, Greatham, Seaton Carew, Wingate and Trimdon

We erect steel right across the UK.

Why Synergy

Why Teesside firms choose Synergy Lifting for steel erection

Sheds on the estuary estates. Cargo and storage buildings go up on open land by the river for shipping and logistics firms.
Decks ready before the chillers arrive. Plant support steel is erected on occupied offices and civic buildings ahead of the plant it carries.
Lift planning and erection under one supervisor. The appointed person’s plan goes straight to the gang that rigs and bolts each member.
Qualified and accredited. CPCS and CSCS carded operatives, lifts planned to BS 7121 by an appointed person, equipment inspected under LOLER and PUWER, SSIP approved, Constructionline Gold Member, certified to ISO 9001 and ISO 14001, and members of the Construction Plant-hire Association.

Services

More than steel erection

Other work we can add to a Teesside steel job:

Process

How a steel erection job works

Your drawings and steel schedule come first, with the site address and the dates in your programme.
A site visit follows, covering where a crane could stand, the ground, the way in for trailers, room to set steel down and any power lines.
The appointed person’s lift plan leads, and the method statement and risk assessment built on it give the temporary stability for each phase.
With your fabricator we settle which members travel on which trailer, in erection order.
We erect and brace bay by bay, line and level the whole frame, and hand it over to the cladders or the next trade on the programme.

FAQs

Common questions

Our new shed is on open land by the estuary. Will the wind hold up the erection?

It can hold up the lighter members and large panels, so the sequence puts the heavy frame members first and the supervisor holds the lighter lifts on a gusty day.

Our Stockton office needs a plant deck on the roof. Can staff stay in the building?

Yes. Your engineer confirms where the new steel bears on the existing roof, the crane stands on a street or car park agreed in advance, and the entrances below are closed off while anything is in the air.

Who plans the lifts?

We do. An appointed person plans every lift to BS 7121: where the crane stands, what it can place from each position, and how the frame stays stable at every break in the work. The same gang then rigs and erects to that plan.

Can you erect steel where a crane cannot reach?

Yes. Mezzanines and internal platforms go up with gantries, jacking equipment and our electric pick and carry crane, which works indoors without fumes. The steel comes in through a door and is lifted into place inside the building.