Contents
Machine movement in Chesterfield and across Derbyshire
We provide machine movement in Chesterfield for precision engineering firms, rail and automotive component makers, food producers and life sciences businesses across the town and north east Derbyshire. We handle one machine or a whole line: new installations, relocations between sites, re-layouts and removal of old plant, plus loading, transport, storage and breakdown recovery. Much of the land east and north of the town sits on old colliery workings, so we check what a floor or yard will carry before we plan the route.
We cover Chesterfield, Staveley, Brampton, Hasland, Clay Cross and Dronfield, and out to Matlock, Mansfield, Worksop and Sheffield. Send us the details and most jobs are priced the same working day from a desktop survey.
What a machine move involves
The machine is disconnected and made safe, rigged and extracted, then transported, positioned, levelled and set down on its mounts. Some jobs need a crane and a low loader. Plenty never leave the building and are done with jacks, skates and gantries. We choose the kit once we know the weight and how long you can stop for.
What we move in Chesterfield
| Equipment | Where it usually is | How it moves |
|---|---|---|
| Machining centres, lathes and grinders | Engineering units at Broom Business Park, Foxwood and Boythorpe | Lifted on jacks, rolled out on skates and loaded by crane or gantry |
| Rail and automotive component cells | Component factories in and around the town | Split cell by cell, moved in sequence and relaid to the new floor plan |
| Presses and fabrication plant | Works on the Chesterfield Trading Estate and south Sheffield | Skated to the door, then craned onto a low loader |
| Process and laboratory equipment | Life sciences and medical device units | Air skates on a protected route, placed on marked positions |
| Filling, packing and conveyor lines | Food plants and distribution sites along the M1 | Broken into sections over a weekend stop and rebuilt in running order |
| New production plant | Recently built units at Markham Vale | Offloaded by crane and positioned on prepared bases |
Tell us the weight and footprint of the machine and we will come back with a method and a price. Our machine movement service page covers the process in full.
Contact us
Get In Touch
Please leave a few details and a member of our machine movement team will be in touch to discuss your requirements in more detail.
Where we work in and around Chesterfield
Our Chesterfield machine movement work comes from a spread of sectors and estates.
Markham Vale
Markham Vale has its own M1 junction, and new manufacturing and distribution units keep arriving. Jobs start with new plant set on its bases, then turn into re-layouts once tenants outgrow their first arrangement. See our construction sector page.
Precision engineering, rail and automotive
Chesterfield makes rail infrastructure components, automotive parts and precision machined work, and machine moves inside these factories come up again and again. Machine tools and presses come and go while the shop keeps running, each landing where the engineers marked the floor. See our rail and automotive pages.
Broom Business Park and the northern estates
Engineering and trade firms fill Broom Business Park, the Chesterfield Trading Estate, Foxwood and Boythorpe. Here we deliver machines and move firms between units, working from yards that leave little room to stand a crane. See our industrial sector page.
Life sciences and medical devices
Alongside its engineering, the town has a health and life sciences base. Equipment in these units is light by our standards, but it has to stay clean and be set down to a measured position inside a validated area. See our healthcare and pharma page.
Food, drink and logistics
When a food plant changes a product or an M1 distribution site changes its handling, lines and conveyors come out and new ones go in. We work over a weekend stop and rebuild in the order the site needs. See our food and beverages page.
South Sheffield
The steel and heavy manufacturing belt south of Sheffield is about eight miles north, and plenty of our jobs run between the two. Heavy presses and large fabrications there go out by crane and low loader. See our plastics and metals page.
Access and planning for a machine move in Chesterfield
Points we check on most Chesterfield jobs:
- Getting loads in and out. Junctions 29, 29a and 30 of the M1 all serve the town, with the A61, A617, A619 and A632 carrying traffic around it. We check low bridges and weight limits before we quote.
- Old mine workings. Land east and north of the town is built over former colliery workings and made ground. We check bearing capacity before a crane or trailer stands in a yard.
- Factory floors. Slabs in older units can be thin or cracked. We look at the floor along the skate route and spread point loads with steel plate.
- Production and shifts. In running or validated factories we time the move around shift changes and cleaning, agreed with the site team beforehand.
- Road closures. If a load-out needs part of a road or pavement closed, we arrange the traffic management and closure with Derbyshire County Council or Chesterfield Borough Council.
Moving large or heavy machinery by road
A vehicle and load over 44,000kg gross, 2.9m wide or 18.65m long is an abnormal load. Up to 80,000kg the highway and bridge authorities need two clear working days’ notice through ESDAL, rising to five above that, when the police need notice too. Loads over 2.9m wide or 18.65m long also need two clear working days’ notice to the police. Above 150,000kg or 6.1m wide a Special Order is needed, applied for about ten weeks ahead. We handle the notifications ourselves or with your haulier. From Chesterfield, heavy loads join the M1 at junction 29 or 30 within a few miles of most sites.
Postcodes and areas we cover
We cover the Chesterfield S postcodes and the districts around them:
- Chesterfield: town centre, Brampton, Walton, Newbold, Hasland and Brimington
- East and north: Staveley, Markham Vale, Barlborough, Bolsover, Dronfield, Eckington and Killamarsh
- South and west: Wingerworth, Holmewood, Clay Cross, Ashover and Matlock
- Wider area: Sheffield, Rotherham, Worksop, Mansfield and Derby
We also move machinery right across the UK.
Why Chesterfield firms choose Synergy Lifting for machine movement
- Factory work is our normal. Machine tools, presses and production plant inside running factories make up the bulk of our Chesterfield work.
- Priced after a proper look. We check the floors and the route out before we price, so the plan on the day matches the quote.
- One firm from start to finish. Our own people run the crane, skates, jacks, gantries and transport, so nothing is handed between contractors.
- Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, equipment inspected under LOLER and PUWER, SSIP approved, Constructionline Gold Member, certified to ISO 9001 and ISO 14001, and members of the Construction Plant-hire Association.
More than machine movement
A Chesterfield machine move often brings other work with it, so we also offer:
How a machine move works
- Send us the weight and dimensions, where the machine is now, where it is going and your dates. Photos help.
- We price it, usually the same working day from a desktop survey. Complex moves may need a site visit first.
- We prepare the method statement, risk assessment and lift plan.
- On the day we rig, extract, transport and position the machine.
- It is set down and levelled, ready for your engineers to reconnect and commission.
Common questions
Our unit is on former colliery land. Does that affect the move?
It can, and we check it on every job. Old workings and made ground change what a yard or floor will carry, so we assess bearing capacity for the crane and transport and put down mats or steel plate where the margin is thin.
Can you relocate our whole factory to a new unit at Markham Vale?
Yes. We take the plant out line by line, move it by low loader and install it on the new floor in the order you want it running again. We phase the relocation around your dates so you lose as little production as possible.
Who disconnects and reconnects the machine?
Mechanical disconnection and making safe is usually our job, and the machine is positioned accurately enough for commissioning. Electrical and control reconnection is coordinated with your own engineers or the machine manufacturer, with who covers what agreed at survey stage.
Can you move a machine that has broken down?
Yes. A breakdown goes to the front of our queue because the line has stopped. Ring us with the machine details and we will give you a firm attendance time on the call.
Get a quote for machine movement in Chesterfield
- Phone: 01246 808 936
- Email: chesterfield@synergy-lifting.co.uk
Send us the weight and a few photos of the machine, and tell us where it is going.
We also provide machine movement in Sheffield, Derby, Nottingham and Doncaster. See all the machine movement locations.