Contents
Crane hire in Blackpool and across the Fylde coast
We provide crane hire in Blackpool, where the lifting year has a shape to it. The attractions, hotels and venues get their plant and ride work done outside the season, the industrial estates by the M55 work all year, and the airport site has its own building programme. The other constant is the wind coming in off the Irish Sea, which decides more Blackpool lifts than anything else.
We supply mobile cranes with operators, and we plan and run full contract lifts, across Blackpool, Squires Gate, Marton, Bispham, Lytham St Annes, Kirkham, Cleveleys, Fleetwood and out towards Preston. Most enquiries get a quote the same working day.
Crane hire or a contract lift?
With CPA crane hire, we supply the crane and operator, and you provide the lift plan, appointed person and lifting insurance. With a contract lift, we handle all of it. Every lift is carried out to BS 7121 by CPCS or NPORS operators, with equipment inspected under LOLER and PUWER. Our guide to crane hire vs contract lifting explains the difference in more detail.
Cranes for Blackpool jobs
| Crane type | Capacity / reach | Typical use |
|---|---|---|
| All-terrain mobile crane | From 40t to 1,000t | Ride and structure work, heavy plant, large structures |
| City crane / pick and carry | From 5t to 60t | Promenade sites, hotel yards and restricted access |
| Mobile tower crane | Up to 60m | Tight sites needing height and reach without a fixed tower crane |
| Tower crane | Luffing, flat top and self-erecting | Longer construction programmes and restricted sites |
Tell us the weight, radius and access for your Blackpool job and we’ll recommend the right machine. Not sure where to start? Read our guide to what size crane you need.
Contact us
Get In Touch
Please leave a few details and a member of our crane hire and contract lifting team will be in touch to discuss your requirements in more detail.
Where we work in and around Blackpool
Most of our Blackpool crane hire work falls into a handful of sectors.
Attractions, rides and venues
Blackpool’s attractions carry a lot of permanent structure, and keeping it running means component changes, ride maintenance lifts and installation work, nearly all of it booked for the closed season or an overnight window. Working over public areas and beside listed and landmark structures shapes the method as much as the load does.
Hotels, venues and rooftop plant
The town has a large hotel and venue estate, and chiller, air handling unit and lift plant replacement on those buildings is regular work, usually from the street or a small yard with pedestrians close by. See our HVAC sector page.
The M55 industrial estates
Blackpool and Fylde Industrial Estate on Progress Way, Clifton Trade Park and the Squires Gate estates by the airport hold manufacturing, engineering and trade operations. Typical jobs are machinery deliveries and installs, factory moves and plant removals. See our industrial sector page.
The airport site and aerospace
Investment at the airport has brought new hangars, a passenger handling facility and site infrastructure, with a general aviation and aerospace cluster building up alongside it. That work means steel, cladding and plant lifts fitted around live airside operations. See our aerospace and construction sector pages.
Health, social care and public buildings
Health and social care is a large employer locally, and plant replacement on hospital, care and public buildings is steady work, mostly on sites that stay open. See our healthcare and pharma page.
Food manufacturing and energy
Food production across the Fylde and energy and utilities work along the coast bring line installs, tanks and vessels, substation equipment changes and component handling inside fixed outage windows. See our food and beverages and power and renewables sector pages.
Access and planning for lifts in Blackpool
Every site is different, but a few things come up again and again on Blackpool jobs:
- Wind first. Seafront and promenade lifts are the ones most often stopped by weather. We plan around the crane’s wind limits and the shape of the load, and agree in advance what happens if the forecast turns.
- Getting there. The M55 runs in from the M6 at Preston, with junction 3 for Fleetwood and junction 4 for the town and the estates. Larger all-terrain cranes and ballast loads are routed around low bridges and weight limits, and we plan the route before we quote.
- The promenade and the tramway. The tramway runs the length of the seafront with overhead lines above it, so lifts near the prom need clearances, and sometimes an isolation, agreed in advance.
- Crowds and season. Working over or beside public areas means exclusion zones, marshalling and, in most cases, doing the job out of season or overnight.
- Ground and road closures. Sand, made ground and buried services along the seafront all need checking, so we confirm ground bearing and use crane mats where needed. Where a lift needs part of a road or pavement closed, we can arrange the traffic management and road closure with Blackpool Council as part of the job.
Postcodes and areas we cover
We cover every FY postcode, including:
- FY1 to FY2: Blackpool town centre, the promenade, North Shore and Bispham
- FY3 to FY4: Marton, Layton, Squires Gate, Stanley Park and the Progress Way estates
- FY5 to FY7: Thornton-Cleveleys, Poulton-le-Fylde and Fleetwood
- FY8: Lytham St Annes, Ansdell, Fairhaven and the wider Fylde
- Wider area: Kirkham, Wesham, Preston, Lancaster, Garstang, Chorley and the Ribble Valley
Beyond the Fylde coast we also work across Lancashire, Merseyside and Greater Manchester. See all the areas we cover.
Why Blackpool firms choose Synergy Lifting for crane hire
- Weather planned for, not hoped about. On a seafront job the wind limits and the contingency are part of the plan from the start.
- Used to working over public areas. Exclusion zones, marshalling and out-of-season or overnight windows are normal for us.
- Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, and a business certified to ISO 9001 and ISO 14001, with Constructionline Gold Member registration.
- One contractor for the whole lift. We can take on the lift plan, appointed person, RAMS, supervision and insurance.
More than cranes
Many Blackpool jobs need more than a lift, so we also offer:
How to book a crane
- Send us the site location, load weight, access details and dates. Photos help.
- We quote, usually the same working day. Complex lifts may need a site visit first.
- For contract lifts we prepare the lift plan and RAMS. For CPA hire we advise on crane position and set-up.
- We arrive on the agreed day and carry out the lift to BS 7121.
Common questions
What happens if the wind stops a seafront lift?
We plan for it rather than hope. Wind limits come from the crane’s chart and the shape of the load, and on exposed sites we agree in advance what happens if the forecast turns, so the decision is made before the crane is on hire.
Can you work over a public area?
Yes, with exclusion zones, marshalling and, where needed, a road or pavement closure. In practice most of this work is done out of season or overnight, which makes it safer and quicker.
Can you lift near the tramway?
Yes, with the clearances agreed beforehand. The overhead lines set a minimum distance for the boom and the load, and some positions need an isolation arranging, which takes lead time.
Get a quote for crane hire in Blackpool
- Phone: 01253 928 180
- Email: blackpool@synergy-lifting.co.uk
We also provide crane hire in Preston, Wigan, Liverpool and Warrington. See all the areas we cover.