Crane Hire Newport

Cranes for Newport jobs

Tell us the weight, radius and access for your Newport job and we’ll recommend the right machine. Not sure where to start? Read our guide to what size crane you need.

Where we work in and around Newport

Most of our Newport crane hire work falls into a handful of sectors.

The docks and project cargo

Newport’s docks handle steel, forest products and outsize loads, and lifting there means quayside handling, terminal plant maintenance and transfers between road, rail and vessel, all planned around the berth and the tide. See our maritime sector page.

Steel and heavy manufacturing

The works at Llanwern and the plants around the eastern edge of the city run rolling, coating and finishing lines. The lifting is roll changes, drive and gearbox replacement, coil handling equipment and line sections, usually inside a planned outage on a floor with very little spare room. See our industrial sector page.

Semiconductors and advanced manufacturing

The plants at Duffryn bring a different kind of lift: process tools and clean-room plant where the value is in the equipment rather than the weight, the route runs through controlled space, and vibration and cleanliness matter as much as capacity. See our industrial and HVAC sector pages.

Power and energy sites

The Uskmouth site and the substations and energy plant around the estuary bring a mix of dismantling redundant equipment and installing its replacement, often on a constrained footprint beside water. See our power and renewables page.

Food, drink and the Gwent estates

Queensway Meadows, Spytty, Leeway, Rogerstone and the Magor and Cwmbran estates hold food, drink, packaging and engineering operations. Typical jobs are machinery deliveries and installs, tanks and silos, factory relocations and rooftop unit changes. See our food and beverages sector page.

Hospitals, schools and city-centre schemes

Chiller, air handling and plant room replacement on the hospital, college and school sites across Newport, Torfaen and Monmouthshire, plus steel erection and rooftop plant on the regeneration work in and around the city centre. See our healthcare and pharma and construction sector pages.

Access and planning for lifts in Newport

Every site is different, but a few things come up again and again on Newport jobs:

• The Brynglas tunnels. The M4 through Newport runs into tunnels with height and width restrictions, so an abnormal load coming from the east or the west often cannot simply follow the motorway through. We establish the legal route early, because on some loads it changes the whole programme.
• The tide on the Usk. The tidal range here is exceptional, and anything on or beside the river or in the dock basins is planned around the window rather than the working day. Rescue provision and edge protection go into the plan with it.
• The Severn crossings. Loads from England arrive over one of the two bridges, and which one is usable depends on the dimensions and on high winds across the estuary, which close them to high-sided vehicles more often than people expect.
• Gradients up the valleys. North of the city the sites sit on slopes with tight approaches, and set-up on a gradient changes both the machine we send and how it is rigged.
• Ground on the levels. The low ground either side of the river is soft alluvium crossed by drainage reens, so outrigger loads and mat requirements get confirmed rather than assumed.
• Road closures. Where a lift needs part of a road or footway closed, we can arrange the traffic management and road closure with Newport City Council, or with Torfaen or Monmouthshire as the site requires.

Postcodes and areas we cover

We cover the NP postcodes across Newport and Gwent:

• Newport: city centre, the docks and Pill, Maindee, Alway, Ringland, Bettws and Malpas
• West: Duffryn, Rogerstone, Bassaleg, Risca and Crosskeys
• East: Langstone, Llanwern, Magor, Undy, Caldicot and Chepstow
• North: Caerleon, Cwmbran, Pontypool, Abergavenny and Blackwood

Beyond Newport we also work across south Wales and over the Severn into the west of England. See all the areas we cover.

Why Newport firms choose Synergy Lifting for crane hire

• We plan the route before the crane. With tunnel restrictions on the motorway and two estuary crossings, the access here decides what is possible, so we settle it at quoting stage rather than on the morning.
• Tidal and riverside work is familiar. Lifts tied to a water window, with rescue provision and edge protection built into the plan rather than added afterwards.
• Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, and a business certified to ISO 9001 and ISO 14001, with Constructionline Gold Member registration.
• One contractor for the whole lift. We can take on the lift plan, appointed person, RAMS, supervision and insurance.

More than cranes

Many Newport jobs need more than a lift, so we also offer:

• Machine movement
• Machine delivery and installation
• Factory relocation
• Industrial plant dismantling
• Steel erection and dismantling
• Plant room strip out
• Traffic management and road closures

How to book a crane

1. Send us the site location, load weight, access details and dates. Photos help.
2. We quote, usually the same working day. Complex lifts may need a site visit first.
3. For contract lifts we prepare the lift plan and RAMS. For CPA hire we advise on crane position and set-up.
4. We arrive on the agreed day and carry out the lift to BS 7121.

Common questions

Will an abnormal load get through the Brynglas tunnels?

It depends on the dimensions, and where it will not the load has to be routed around the city or over a different crossing, which adds time and sometimes an escort. Give us the load size early and we will establish the route before anything else is committed.

Can you lift over or beside the river?

Yes, and the tide decides when. We work back from the water window to fix the set-up time, and the plan covers rescue provision, edge protection and what happens if the window is missed.

Can you move process tools into a clean room?

Yes. That work is usually a crane to get the equipment into the building and skates, rollers and jacking to get it to its final position, and we plan the two halves as one job. Our machine delivery and installation page covers how we approach it.

Get a quote for crane hire in Newport

• Phone: 029 2168 5409
• Email: newport@synergy-lifting.co.uk

We also provide crane hire in Cardiff, Bristol, Swansea and Exeter. See all the areas we cover.