Contents
Machine movement in Newport and across Gwent
We provide machine movement in Newport for metals processors, electronics manufacturers, food plants, port businesses and public buildings across the city and Gwent. The work runs from one machine to a complete line: new plant, relocations, re-layouts and removals, along with transport, storage and breakdown call-outs. Loads crossing the city on the M4 have to clear the Brynglas tunnels, so we settle the road route when we quote.
We work across Newport, Caerleon, Rogerstone, Duffryn, Langstone and Magor, and out to Caldicot, Cwmbran and Pontypool. Most enquiries get a price the same working day from a desktop survey.
What a machine move involves
First the machine is made safe and disconnected. Then it is rigged, extracted and carried to its new spot, where it is positioned, levelled and lowered onto its mounts. A crane and low loader come in when it leaves the building, and moves within a site use jacks, skates and gantries. Which kit we bring depends on what it weighs, how it gets out of the building and how long production can be down.
What we move in Newport
| Equipment | Where it usually is | How it moves |
|---|---|---|
| Coating, slitting and finishing line equipment | Steel and metals businesses around the city | Split into sections and taken out in stages during an outage |
| Process tools and clean-room plant | Semiconductor and electronics manufacturers | Moved on air skates along a protected route to a marked position |
| CNC machines, presses and fabrication plant | Engineering units at Queensway Meadows, Spytty and Leeway | Jacked up, skated to the door and gantried onto a trailer |
| Filling, packing and conveyor lines | Food and drink plants on the Newport and Cwmbran estates | Taken down in modules, then reinstalled and aligned at the new position |
| Handling plant and workshop machinery | The docks and the quayside yards | Low loader to the yard, with a crane for the heavier pieces |
| Chillers, generators and transformers | Hospital, school and substation plant rooms | Lifted by crane to roof or yard level and rolled onto the plinth |
Send the weight and size of the machine and both addresses, and we will say how we would move it. Our machine movement service page sets out each stage.
Contact us
Get In Touch
Please leave a few details and a member of our machine movement team will be in touch to discuss your requirements in more detail.
Where we work in and around Newport
Our machine movement work in Newport comes from a handful of sectors.
The docks and port businesses
Firms around the docks run handling plant and workshop machinery. Some machines arrive by ship and go straight onto our transport, and moves on the quayside are fitted around berth bookings and yard traffic. See our maritime sector page.
Steel and metals
Steel coating, finishing and stockholding businesses around the city run heavy line equipment. When a section is replaced, we remove the old one and install its replacement inside a planned outage, on crowded floors with overhead cranes working nearby. See our plastics and metals page.
Semiconductors and electronics
Newport has a cluster of semiconductor and electronics manufacturers. Their process tools weigh less than a press but are worth far more, so floor protection and the order of work are agreed with the site team before anything moves. See our industrial sector page.
Queensway Meadows, Spytty and Leeway
These south-east estates hold engineering, fabrication, packaging and trade firms. They move up to bigger units and swap old machines for new, and we handle both. See our industrial sector page.
Food and drink across Gwent
On estates across Newport and Cwmbran, food and drink producers install and move lines during short shutdowns. We follow the site’s hygiene rules and hand the line back section by section. See our food and beverages page.
Plant rooms and energy sites
Hospitals, colleges and schools across Newport, Torfaen and Monmouthshire replace chillers, air handling units and generators. Substations and energy plant around the estuary change transformers and switchgear. Both run to dates booked well ahead with the estates or network team. See our healthcare and pharma and power and renewables pages.
Access and planning for a machine move in Newport
Points we check on most Newport jobs:
- Getting loads in and out. The M4 runs across the north and east of the city and the A48 Southern Distributor Road serves the docks. Loads from the south of England come over the Severn bridges, which high winds can close to high-sided vehicles, and loads from the Midlands come down the A449.
- The Brynglas tunnels. The M4 passes under Brynglas through two tunnels with height and width limits. Tall or wide loads leave the motorway and take another route across the city, fixed before the date.
- Floors and ground. Low ground by the Usk and on the levels is soft and cut by drainage reens. We check what a floor or yard will carry before a skate route or crane position is fixed.
- Production stops. Line moves are fitted around your outages and weekend stops. Setting up and clearing away eat into each stop, so we allow for them from the first plan.
- Road closures. Where a load-out needs part of a road or footway, we can arrange the traffic management and road closure with Newport City Council, Torfaen County Borough Council or Monmouthshire County Council.
Moving large or heavy machinery by road
A vehicle and load over 44,000kg gross, 2.9m wide or 18.65m long is an abnormal load. Up to 80,000kg the highway and bridge authorities need two clear working days’ notice through ESDAL, rising to five above that, when the police need notice too. Loads over 2.9m wide or 18.65m long also need two clear working days’ notice to the police. Above 150,000kg or 6.1m wide a Special Order is needed, applied for about ten weeks ahead. We handle the notifications ourselves or with your haulier. From Newport, heavy loads usually join the M4 at Coldra or Tredegar Park, or head north on the A449 and A4042.
Postcodes and areas we cover
We cover the NP postcodes across Newport and the surrounding Gwent towns:
- Newport: city centre, Pill, Maindee, Alway, Ringland, Bettws and Malpas
- West: Duffryn, Rogerstone, Bassaleg, Risca and Crosskeys
- East: Langstone, Llanwern, Magor, Undy, Caldicot and Chepstow
- North: Caerleon, Cwmbran, Pontypool, Abergavenny and Blackwood
We also move machinery right across the UK.
Why Newport firms choose Synergy Lifting for machine movement
- We look before we price. Floors, lifting points and the way out are checked at survey, so the approved plan is the one we carry out.
- Heavy industry and clean rooms. We move line sections in metals plants and process tools through controlled space, each to the site’s own rules.
- One firm from start to finish. The crane, skates, jacks, gantries and transport on your job are ours and run by our own crews, with nobody else to chase.
- Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, equipment inspected under LOLER and PUWER, SSIP approved, Constructionline Gold Member, certified to ISO 9001 and ISO 14001, and members of the Construction Plant-hire Association.
More than machine movement
Newport machine moves often need one of these too:
How a machine move works
- Send us the weight and dimensions, where the machine is now, where it is going and your dates. Photos help.
- We price it, usually the same working day from a desktop survey. Complex moves may need a site visit first.
- We prepare the method statement, risk assessment and lift plan.
- On the day we rig, extract, transport and position the machine.
- It is set down and levelled, ready for your engineers to reconnect and commission.
Common questions
Will a tall load get through the Brynglas tunnels?
It depends on the loaded height and width. If it will not fit, the load leaves the M4 and crosses Newport on a surface route, sometimes with an escort or at night. Give us the dimensions early and we will confirm the route before the date is fixed.
Can you move a whole production line to a new unit in Gwent?
Yes. We survey both buildings and number and photograph each section before it is disconnected. The new floor is marked out first, and the line travels in the order it will be rebuilt.
Who disconnects and reconnects the machine?
Mechanical disconnection and making safe is usually ours, and we position the machine precisely enough for commissioning. Electrical and control reconnection is coordinated with your own engineers or the machine manufacturer, and who covers what is agreed at survey stage.
Can you move a machine that has broken down?
Yes. Breakdown work is prioritised because production has usually stopped. Call us with the machine details and we will give you a firm attendance time on the call.
Get a quote for machine movement in Newport
- Phone: 029 2168 5409
- Email: newport@synergy-lifting.co.uk
Tell us what the machine weighs and where it needs to go, and add a few photos if you can.
We also provide machine movement in Cardiff, Bristol, Swansea and Exeter. See all the machine movement locations.