Crane Hire Hartlepool

Cranes for Hartlepool jobs

Give us the weight, the radius and the access for your Hartlepool job and we will put forward the right machine. Unsure where to start? Read our guide to what size crane you need.

Where we work in and around Hartlepool

Our Hartlepool crane hire work tends to fall into these sectors.

The port, offshore and decommissioning

The Port of Hartlepool, Victoria Harbour and the deep-water yards south of the town handle cargo, offshore fabrication and decommissioning work. Quayside and yard lifts get planned around vessel movements, ground bearing at the edge and the weather coming in off the North Sea. See our maritime sector page.

Energy and renewables

Power generation on the coast, subsea cable and offshore component manufacturing, and substation and grid equipment across the area bring transformer changes, component handling and outage work to tight fixed windows. See our power and renewables sector page.

Heavy engineering and process plant

Steel pipe manufacturing, fabrication and the process and chemical plants on the north bank of the Tees bring machinery installs, vessel and pipework lifts, plant removals and shutdown work. See our industrial sector page.

Industrial estates and distribution

The estates around Oakesway, Sovereign Park, Wynyard and Billingham hold manufacturing, engineering and distribution operations. Typical jobs are machinery deliveries and installs, factory moves and rooftop unit changes. See our HVAC sector page.

Town centre and waterfront construction

Regeneration through the town centre and around the marina and waterfront brings steel erection, precast, cladding and rooftop plant on plots hemmed in by streets, the railway and the water. See our construction sector page.

Hospitals, colleges and schools

Chiller and air handling unit replacement, plant room equipment, laboratory kit and modular building lifts on sites that stay open or during a holiday shutdown. See our healthcare and pharma and education sector pages.

Rail, utilities and waste

Work on and beside the coast railway inside a possession, utility equipment changes and plant replacement at waste and recycling sites, all to fixed windows and exact timings. See our rail and waste and recycling sector pages.

Access and planning for lifts in Hartlepool

Every site is different, but a few things come up again and again on Hartlepool jobs:

• Getting there. The A19 runs north to south a few miles west of the town, with the A179 and A689 bringing traffic in, and the A178 running down the coast towards Seaton Carew and the yards south of it. We check the route for low bridges and weight restrictions before quoting, and larger all-terrain cranes and their ballast loads are routed accordingly.
• Port and yard rules. The port and the deep-water yards mean inductions, permits and vehicle rules, and lifts timed around vessel and cargo movements. The earlier we have the berth or yard and what the site requires, the easier that is to build into the plan.
• The railway. The coast line runs through the town and out along the coast. Lifts over or beside it need clearances, and sometimes a possession, agreed with Network Rail in advance, which takes lead time.
• Ground conditions. Dock and quayside land and the reclaimed ground south of the town are largely made ground. Outrigger positions and allowable ground pressures get confirmed on site, with crane mats or spreader packs where the surface needs them.
• Coastal weather. Wind coming in off the North Sea can stop a lift, so exposed and quayside jobs get planned with a wind limit and, where the programme allows, a fallback day.
• Road closures. Where a lift needs part of a road or pavement closed, we can arrange the traffic management and road closure with Hartlepool Borough Council as part of the job.

Postcodes and areas we cover

We cover the TS postcodes across the town and the area around it:

• Hartlepool: town centre, the Headland, the docks and marina, Oakesway, West Park, Rift House and Owton Manor
• South and coast: Seaton Carew, Graythorp, Greatham, Billingham and Seal Sands
• North and west: Hart, Elwick, Blackhall, Castle Eden, Wynyard, Sedgefield and Peterlee
• Wider area: Stockton-on-Tees, Middlesbrough, Durham, Seaham and Redcar

Beyond Hartlepool we also work across Teesside, County Durham and Tyne and Wear. See all the areas we cover.

Why Hartlepool firms choose Synergy Lifting for crane hire

• North East based. Our depot at Darlington is a short run up the A19, so Hartlepool is regular work rather than an out-of-area job.
• Shutdown and outage work. Tight windows with a fixed hand-back are routine here, and the machine, the access and the crew are all planned around them.
• Qualified and accredited. CPCS and NPORS operators, lifts planned to BS 7121, and a business certified to ISO 9001 and ISO 14001, with Constructionline Gold Member registration.
• One contractor for the whole lift. We can take on the lift plan, appointed person, RAMS, supervision and insurance.

More than cranes

Many Hartlepool jobs need more than a lift, so we also offer:

• Machine movement
• Machine delivery and installation
• Factory relocation
• Industrial plant dismantling
• Steel erection and dismantling
• Plant room strip out
• Traffic management and road closures

How to book a crane

1. Send us the site location, load weight, access details and dates. Photos help.
2. We quote, usually the same working day. Complex lifts may need a site visit first.
3. For contract lifts we prepare the lift plan and RAMS. For CPA hire we advise on crane position and set-up.
4. We arrive on the agreed day and carry out the lift to BS 7121.

Common questions

Can you work inside the port or on a quayside berth?

Yes. Port and dock sites mean inductions, permits and vehicle rules, and lifts planned around vessel and cargo movements. Tell us the berth or yard and what the site requires and we’ll build it into the lift plan.

Can you work inside a shutdown or outage?

Yes, and on the process and energy sites here that is when most of the work happens. Send us the window and the lift details and we will work the machine, the access and the set-up backwards from your hand-back time, nights and weekends included.

Do you cover Billingham, Peterlee and the coast either side?

Yes. We work across the whole area from Seaham and Peterlee down through Hartlepool and Seaton Carew to Billingham, Stockton and Middlesbrough, and the same crane and operator can take in more than one site in a day where the timings allow.

Get a quote for crane hire in Hartlepool

• Phone: 01642 843 216
• Email: hartlepool@synergy-lifting.co.uk

Our nearest depot is Synergy Lifting Ltd, Unit 34, Forge Way North, Cleveland Industrial Estate, Darlington, DL1 2PB.

We also provide crane hire in Middlesbrough, Teesside, Durham and Sunderland. See all the areas we cover.