Liebherr LTM 1800 Specification

About the Liebherr LTM 1800

With its 60m main boom, the 8 axle Liebherr LTM 1800 has exceptional lifting capacity whilst maintaining its versatile manoeuvrability.

Download Liebherr LTM 1800 Spec Sheet

CRANE HIRE QUOTE

Technical Summary for the Liebherr LTM 1800

Max Load Capacity800 tonnes
Main Boom From19.3 metres
Main Boom Up To60 metres
Additional Jib From14 metres
Additional Jib Up To91 metres
Ballast / Counterweight As Travels16 tonnes
Additional Ballast / Counterweight144 tonnes
Total Ballast / Counterweight160 tonnes
Number Of Axles8 axles
Axle Load12 tonnes per axle
Total Axle Load96 tonnes
Axleload calculation based on -.
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.

Dimensions As Travels for the Liebherr LTM 1800

HeightWidthLength
4 metres2.5 metres17.91 metres
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.

Outrigger Base for the Liebherr LTM 1800

Outrigger SetupWidthLength
Fully Rigged13 metres13 metres
Half Rigged9.07 metres9.67 metres
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.

Hook Block for the Liebherr LTM 1800

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
35015315
2359194
93372
41131.2
14.3-10.6
----
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.

Crane Carrier for the Liebherr LTM 1800

FrameLiebherr designed and manufactured, box type, torsion resistant, all-welded construction made of high-tensile structural steel.
Outriggers4 hydraulic swing-out beams with support pad jacks.
EngineDiesel, 8 cylinder, watercooled, make Liebherr, type D 9408 TI-E, output 420 kW DIN (570 HP) at 2100 min1 acc. to ECE-R 24.03 and ECE-R 49.02 (EURO II), max. torque 2332 Nm at 1500 min1. Fuel tank capacity: 600 litres.
TransmissionAllison type CLBT 755 automatic transmission with torque converter and hydrodynamic retarder brake. 5 forward speeds, 1 reverse. Splitter gearbox with differential and differential lock, off-road range.
AxlesHeavy duty crane truck axles, all 8 axles sprung. Axles 1 to 4 and 7 and 8 steered. Axles 1, 2, 5 and 6 have planetary reduction gears with differential locks.
SuspensionAll axles are hydropneumatically sprung with automatic levelling. Load equalization between all axle pairs. Suspension can be hydraulically locked.
Tyres24 tyres. Axles 1, 2, 5 and 6 with single tyres, axles 3, 4, 7 and 8 with twin tyres. Tyre size: 14.00 R 25.
SteeringZF semi-unitary hydraulic power steering with 2 pump circuits. Main pump circuit driven from engine, auxiliary pump circuit from final drive.
BrakesService brake: servo assisted air brakes acting on all wheels, dual circuit system. Hand brake: spring-action, acting on all wheels of axles 2 to 7.
Driver’s CabLarge-area, all-steel cab with resilient mountings, safety glass windows and full range of instruments.
Electrical System24 Volts DC, 2 batteries, 143 Ah each, lighting to German road vehicle regulations.
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.

Crane Superstructure for the Liebherr LTM 1800

Crane DriveDiesel-hydraulic, with 5 axial piston variable-output pumps with servo control and automatic output regulation.
HoistAxial piston swivelling motor, rope drum with integrated planetary gear and spring loaded brake.
SlewHydraulic motor, planetary gear, slewing pinion and spring loaded brake.
Telescopic Boom1 boom pivot section and 3 telescopic sections. All sections hydraulically extendable separately under partial load. Boom length: 19,3 m 60 m.
Crane CabAll-steel construction, safety glazing, controls and instruments. Cab can be extended sideways and tilted rearwards to improve operator’s view.
Technical information provided here for the Liebherr LTM 1800 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1800.
Comments for this post are closed.