Liebherr LTM 1500-8.1 Specification

About the Liebherr LTM 1500-8.1

The LTM 1500-8.1 is suitable for universal use with an extensive range of boom systems. Its load capacities can be increased even further with its Y boom guying.

Download Liebherr LTM 1500-8.1 Spec Sheet Crane Hire Quote

Technical Summary for the Liebherr LTM 1500-8.1

Max Load Capacity500 tonnes
Main Boom From16.1 metres
Main Boom Up To84 metres
Additional Jib From6 metres
Additional Jib Up To91 metres
Ballast / Counterweight As Travels15 tonnes
Additional Ballast / Counterweight120 tonnes
Total Ballast / Counterweight135 tonnes
Number Of Axles8 axles
Axle Load12 tonnes per axle
Total Axle Load96 tonnes
Axleload calculation based on With 50m telescopic boom..
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.

Dimensions As Travels for the Liebherr LTM 1500-8.1

HeightWidthLength
4 metres3.23 metres20.97 metres
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.

Outrigger Base for the Liebherr LTM 1500-8.1

Outrigger SetupWidthLength
Fully Rigged9.6 metres10.012 metres
Half Rigged6.25 metres10.012 metres
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.

Hook Block for the Liebherr LTM 1500-8.1

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
274.113276.1
247.711233.7
171.17152.7
84.7372.6
37.4131.4
12.5--0.7
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.

Crane Carrier for the Liebherr LTM 1500-8.1

FrameLiebherr designed and manufactured, box-type, torsion resistant design of high-tensile fine grained structural steel.
OutriggersFour hydraulically extendable sliding beams with hydraulic jacks and supporting pads. The front outrigger casing is mounted between axles 3 and 4 and the rear casing is located at the rear of the carrier. Supporting basis: 10 m longitudinally x 9.6 m transversally.
Engine8-cylinder Diesel, make Liebherr, type D9508 A7, watercooled, output 500 Kw (680 h.p.) at 1900 min-1. Exhaust emissions acc. to 97/68/EG stage 3 and EPA/CARB Tier 3. Max. torque 3000 Nm at 1100 – 1500 min-1. Fuel reservoir: 600 l.
TransmissionAutomatic transmission with torque converter and intarder fitted directly to the gear unit, manufactured by ZF, type TC-TRONIC with 12 forward and 2 reverse gears, transfer case with locking central differential.
AxlesHeavy-duty vehicle axles. All axles suspended. Axles 1 to 4 and 7 and 8 steered. Axles 1, 2, 4 and 5 are planetary axles.
SuspensionAll axles with hydropneumatic suspension and automatic levelling system. Load equalization between the axle pairs. The suspension can be locked hydraulically.
Tyres16 tyres, all axles equipped with single tyres. Size of tyres: 14.00 R 25.
SteeringZF semi-integral power steering, dual circuit system with hydraulic servo-system and additional backing pump driven by an axle
BrakesService brake: All-wheel servo-air brake, dual circuit system. Additional brakes: Retarder, TELMA-type eddy current brake. Hand brake: Spring-loaded, acting on all wheels of axles 4 to 8.
Driver’s CabSpacious and comfortable sheet steel cab mounted on rubber shock absorbers, safety glass windows, operating and control elements.
Electrical SystemModern data bus technique, 24 Volt DC, 2 batteries of 170 Ah each, lighting according to traffic regulations.
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.

Crane Superstructure for the Liebherr LTM 1500-8.1

Crane DriveDiesel-hydraulic, with 4 axial piston variable displacement pumps, with servo-control and capacity control operating in closed circuit for hoisting, slewing and luffing of lattice jib, 3 axial piston pumps, operating in open circuit for luffing and telescoping.
HoistAxial piston variable displacement motor, Liebherr hoist drum with integrated planetary gear and spring-loaded static brake.
Slew2 slewing gears, consisting of hydraulic motor, planetary gear, slewing pinion and spring-loaded static brake each.
Telescopic BoomVariant 1: Boom length 16.1 m to 50 m, consisting of 1 base section and 3 hydraulic telescopic sections. All telescopic sections extendable individually by means of the rapid-cycle telescoping system TELEMATIK. Variant 2: Boom length 16.1 m to 84 m, consisting of 1 base section and 6 hydraulic telescopic sections. All telescopic sections extendable individually by means of the rapid-cycle telescoping system TELEMATIK.
Crane CabAluminium design with safety glass, operating and control elements. Cab tiltable backwards. The cab will be pivoted to the rear for road transport.
Technical information provided here for the Liebherr LTM 1500-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1500-8.1.
Comments for this post are closed.