Liebherr LTM 1450-8.1 Specification

About the Liebherr LTM 1450-8.1

The LTM 1450-8.1 features a very long yet powerful 85 metre telescopic boom. The Liebherr 8-axle crane has been designed for worldwide cost-effective mobility and fast, easy set-up on site, which has resulted in the LTM 1450-8.1 being capable of travelling on public roads with a 12-tonne axle load including its 85 metre long telescopic boom, all supports and a complete hoist winch. This means that it can be quickly prepared for use once it reaches the site.

Download Liebherr LTM 1450-8.1 Spec Sheet Crane Hire Quote

Technical Summary for the Liebherr LTM 1450-8.1

Max Load Capacity450 tonnes
Main Boom From16.1 metres
Main Boom Up To85 metres
Additional Jib From7 metres
Additional Jib Up To84 metres
Ballast / Counterweight As Travels0 tonnes
Additional Ballast / Counterweight134 tonnes
Total Ballast / Counterweight134 tonnes
Number Of Axles8 axles
Axle Load12 tonnes per axle
Total Axle Load96 tonnes
Axleload calculation based on -.
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.

Dimensions As Travels for the Liebherr LTM 1450-8.1

HeightWidthLength
4 metres3 metres19.995 metres
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.

Outrigger Base for the Liebherr LTM 1450-8.1

Outrigger SetupWidthLength
Fully Rigged9.6 metres10.414 metres
Half Rigged6.12 metres10.414 metres
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.

Hook Block for the Liebherr LTM 1450-8.1

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
23922113.7
2011893.3
1711572.7
85731.8
37.4311.4
12.51-0.6
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.

Crane Carrier for the Liebherr LTM 1450-8.1

FrameSelf-manufactured, torsion-resistant box-type design of high-tensile fine grained structural steel.
Outriggers4-point supporting system, hydraulically telescopable into horizontal and vertical direction. Operation with remote control, automatic support leveling, electronic inclination display.
Engine8-cylinder Diesel, make Liebherr, watercooled, output 505 kW (687 h.p.), max. torque 3160 Nm. Exhaust emissions acc. to 97/68/ EG, EPA/CARB, ECE-R.96. Fuel reservoir: 850 l.
TransmissionAutomatic transmission system with torque converter and intarder, make ZF, 12 forward speeds and 2 reverse speeds, transfer case with transfer differential.
AxlesLow maintenance crane chassis axles, all 8 axles steered. Axles 1, 2, 4 and 5 are planetary axles. Axles 2 and 3 with transversal differential locks, axles 2 and 4 with longitudinal differential locks.
SuspensionAll axles are mounted on hydropneumatic suspension – “Niveaumatik suspension” and are lockable hydraulically.
Tyres16 tyres. Size of tyres: 385/95 R 25 (14.00 R 25).
Steering2-circuit system with hydraulic servo steering. Active speed depending rear axle steering, special steering programs for various driving situations.
BrakesService brake: all-wheel servo-air brake, all axles are equipped with disc brakes, dual circuit. Additional brakes: exhaust flap brake, Telma Eddy current brake, intarder in gearbox. Hand brake: Spring-loaded, acting on all wheels of axles 3 to 7.
Driver’s CabSpacious corrosion resistant with comfort furnishings, mounted on rubber shock absorbers, safety glazing.
Electrical SystemModern data bus technique, 24 Volt DC, 2 batteries of 170 Ah each.
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.

Crane Superstructure for the Liebherr LTM 1450-8.1

Crane DriveMechanical drive of the crane hydraulic from the chassis. Variable axial piston pumps with servo control and power regulation.
HoistAxial piston variable displacement motor, hoist drum with integrated planetary gear and spring-loaded static brake. Actuation by closed regulated oil circuit.
Slew2 axial piston constant motors, planetary gear, spring loaded multiple disk brake. Actuation by closed regulated oil circuit.
Telescopic Boom1 base section and 6 telescopic sections. All telescopic sections extendable individually by means of the rapid-cycle telescoping system TELEMATIK. Boom length 16.1 m to 85 m.
Crane CabLarge screen area, compound glass, comfort furnishing, cabin tiltable approx. 20° to rear.
Technical information provided here for the Liebherr LTM 1450-8.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1450-8.1.
Comments for this post are closed.