Liebherr LTM 1350-6.1 Specification

About the Liebherr LTM 1350-6.1

The LTM 1350-6.1 sets standards in the 6-axle class with outstanding load capacities and boom lengths. Its Y guying significantly increases ist load capacities when used with the telescopic boom and lattice jibs.

Download Liebherr LTM 1350-6.1 Spec Sheet

CRANE HIRE QUOTE

Technical Summary for the Liebherr LTM 1350-6.1

Max Load Capacity350 tonnes
Main Boom From14.9 metres
Main Boom Up To70 metres
Additional Jib From6 metres
Additional Jib Up To78 metres
Ballast / Counterweight As Travels100 tonnes
Additional Ballast / Counterweight40 tonnes
Total Ballast / Counterweight140 tonnes
Number Of Axles6 axles
Axle Load12 tonnes per axle
Total Axle Load72 tonnes
Axleload calculation based on -.
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.

Dimensions As Travels for the Liebherr LTM 1350-6.1

HeightWidthLength
4 metres3 metres17.742 metres
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.

Outrigger Base for the Liebherr LTM 1350-6.1

Outrigger SetupWidthLength
Fully Rigged8.53 metres8.932 metres
Half Rigged5.6 metres8.932 metres
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.

Hook Block for the Liebherr LTM 1350-6.1

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
21320123.4
1561472.2
1251151.6
80731
36.2311
12.21-0.6
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.

Crane Carrier for the Liebherr LTM 1350-6.1

FrameSelf-manufactured, torsion-resistant box-type design of high-tensile fine grained structural steel.
Outriggers4-point supporting system, hydraulically telescopable into horizontal and vertical direction. Operation with remote control, automatic support leveling, electronic inclination display
Engine8-cylinder Diesel, make Liebherr, watercooled, output 450 kW (612 h.p.), max. torque 2856 Nm. Exhaust emissions acc. to 97/68/EG and EPA/CARB. Fuel reservoir: 480 l.
TransmissionAutomatic transmission system with torque converter and intarder, make ZF, type TCTRONIC with 12 forward speeds and 2 reverse speeds, transfer case with transfer differential.
AxlesLow maintenance carrier axles, all 6 axles steered. Axle 1, 3 and 5 are equipped with planetary gears, all driven axles with transverse differential locks, axle 3 with longitudinal differential lock
SuspensionAll axles are hydro-pneumatically suspended with automatic leveling. Suspension hydraulically lockable.
Tyres12 tyres, all axles equipped with single tyres. Size of tyres: 385/95 R 25 (14.00 R 25).
Steering2-circuit system with hydraulic servo steering. Active speed depending rear axle steering, special steering programs for various driving situations.
BrakesService brake: all-wheel servo-air brake, all axles are equipped with disc brakes, dual circuit. Additional brakes: exhaust flap brake, Telma Eddy current brake (optional), intarder in gearbox. Hand brake: Spring-loaded, acting on all wheels of axles 2 to 6.
Driver’s CabSpacious and comfortable sheet steel cab mounted on rubber shock absorbers, safety glass windows.
Electrical SystemModern data bus technique, 24 Volt DC, 2 batteries of 170 Ah each.
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.

Crane Superstructure for the Liebherr LTM 1350-6.1

Crane DriveDiesel-hydraulic, with 5 axial piston variable displacement pumps, with servo-control and capacity control.
HoistAxial piston variable displacement motor, hoist drum with integrated planetary gear and spring-loaded static brake.
SlewAxial piston fixed displacement motor, planetary gear, spring-loaded static brake.
Telescopic Boom1 base section and 5 telescopic sections. All telescopic sections extendable individually by means of the rapid-cycle telescoping system TELEMATIK. Boom length 14.9 m to 70 m.
Crane CabLarge screen area, compound glass, comfort furnishing, cabin tiltable 20° to rear.
Technical information provided here for the Liebherr LTM 1350-6.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1350-6.1.
Comments for this post are closed.