Liebherr LTM 1030-2.1 Specification

About the Liebherr LTM 1030-2.1

The Liebherr LTM 1030-2.1 all terrain crane has up to 30m of main boom and an additional jib up to 15m which gives the crane a great lifting height and radius considering its class. With a 2.3te counterweight, the Liebherr LTM 1030-2.1 travels with just 12te per axles - i.e. a total 24te axle load.

Download Liebherr LTM 1030-2.1 Spec Sheet Crane Hire Quote

Technical Summary for the Liebherr LTM 1030-2.1

Max Load Capacity35 tonnes
Main Boom From9.2 metres
Main Boom Up To30.0 metres
Additional Jib From8.6 metres
Additional Jib Up To15.0 metres
Ballast / Counterweight As Travels2.3 tonnes
Additional Ballast / Counterweight3.2 tonnes
Total Ballast / Counterweight5.5 tonnes
Number Of Axles2 axles
Axle Load12.0 tonnes per axle
Total Axle Load24.0 tonnes
Axleload calculation based on 2.3 t counterweight and hook block.
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.

Dimensions As Travels for the Liebherr LTM 1030-2.1

HeightWidthLength
3.6 metres2.55 metres10.158 metres
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.

Outrigger Base for the Liebherr LTM 1030-2.1

Outrigger SetupWidthLength
Fully Rigged6.028 metres6.305 metres
Half Rigged4.328 metres6.305 metres
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.

Hook Block for the Liebherr LTM 1030-2.1

Possible Load (te)No. Of SheavesNo. Of LinesWeight (kg)
35.0510265
22.437165
10.013145
3.3-175
----
----
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.

Crane Carrier for the Liebherr LTM 1030-2.1

FrameLiebherr designed and manufactured. box type, torsion resistant, all-welded construction made of high-tensile structural steel.
Outriggers-point supporting system, hydraulically telescopable into horizontal and vertical direction. Operation with remote control, automatic support levelling. electronic inclination display.
EngineDiesel. 6 cylinder. watercooled. make Mercedes-Benz. output 210 kW (286 h.p.), max. torque 1150 Nm. Exhaust emissions acc. to 97/68/EG, EPA/CARI3, ECE-R.96. Fuel tank capacity: 300 litres.
TransmissionZF power-shift gear with torque converter, lockup, transfer case; 6 forward and 2 reverse speeds.
AxlesFront: planetary axle with differential lock, steerable. Rear: planetary axle with differential lock, steerable.
SuspensionHydropneumatic suspension, lockable hydraulically.
Tyres4 tyres. Tyre size: 385/95 R 25 (14.00 R 25).
SteeringFront axle mechanically steered. with hydraulic power assistance and stand-by steering pump. Rear axle hydraulically steered. Both modes steered hydrostatically from crane cab.
BrakesService brake: all-wheel servo-air brake. all axles are equipped with disc brakes. dual circuit. Hand brake: spring loaded. acting on all wheels. Sustained-action brake: engine brake.
Driver’s CabSpacious corrosion resistant with comfort furnishings, mounted on rubber shock absorbers, safety glazing.
Electrical SystemModern data bus technique. 24 Volt DC, 2 batteries of 110 Ah each.
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.

Crane Superstructure for the Liebherr LTM 1030-2.1

Crane DriveDiesel-hydraulic with 1 axial variable displacement pump with automatic capacity control, 1 double gear pump, driven by the carrier Diesel engine, open regulated oil circuits with electrically controlled "load sensing", operation of 4 movements simultaneously.
HoistMal piston fixed displacement motol; hoist drum with integrated planetary gear and spring-loaded static brio, actuation by open regulated oil circuit.
Slew1 differential hydraulic ram with pilot locking valve.
Telescopic Boom1 base section and 3 telescopic sections. The telescopes are extended by a three-stage hydromechanic telescoping system with double pulley block. Boom telescopable under partial load. Boom length: 9.2 m — 30 m.
Crane CabLarge screen area, compound glass, comfort furnishing.
Technical information provided here for the Liebherr LTM 1030-2.1 is indicative only. Please note the content of the “Disclaimer” notice applicable to this website and contact us to confirm the detailed technical specification for the Liebherr LTM 1030-2.1.
Comments for this post are closed.